Pozovite nas za najbolju cenu i azurnu informaciju o stanju.
A sophisticated camera stabilization system engineered to exceed the needs of today and tomorrows camera advancements.
Lightest, toughest and strongest on the market
A price point guaranteed to impress
Easy set up-Easier to use.
Supports DSLR\'s/HDV/&DV camera systems upto 20lbs.
In a product that demands ‘user friendly’ - this is it.
EXCLUSIVE of Camera, Battery & Matte Box Sunshade
Videos are for DEMONSTARTION purpose Only
WHAT\'S IN THE BOX
7000 Reverse Arm
DV Operator vest
Low mode cage
Once considered a luxury and now a must have production tool, our PROAIM camera stabilizing systems provide directors and operators creative opportunities unheard of just a few years ago. Mirroring the advancements in DSLR\'s and pro camcorders, our design and engineering teams went to work to create an all-new sophisticated platform for image capture. The results of their effort, has made our 7000 Reverse Arm Vest Flycam 6000 Kit an instant success. Add a price point of under $1,500 usd and it is easy to see why we get so many rave reviews. When it comes to quality - design and engineering come to us.
OUR FLYCAM 6000
Our stabilization system works by isolating the user\'s body motion from the camera, while the camera is balanced in a relatively inert and isolated state. We use the title Magic Arm FM to describe the Front Mounting system whereby the Arm distributes the rig weight over your body providing hours of fatigue free shooting.
Fully adjustable Universal Head for precision balance.
Highly sophisticated gimbaled mechanism prevents angular deviation when shooting.
Adjustable broad weight plate on steel rails allows heavier camera balance.
Ball tilt head for LCD monitor mounting.
Quick release plate for easy camera mount and removal.
Brick Battery mount provided.
Wheelbarrow bearing gives rotational control on camera axis.
UNIVERSAL CAMERA MOUNT PLATE
The Camera Base plate has both 1/4\" and 3/8\" mounting slots (holes) to accommodate a variety of camera bases. Adjustments are easy to perform for bothhorizontal and vertical axis by means of thumbscrews.
The base of the stabilizing system is constructed of heavy aluminum with steel rods that support the balancing weights. Aluminum weight plates sit on stainless steel and are housed in weight cups which are screwed onto the aluminum weight plates, all designed to fine tune adjustments to balance your camera. The stalk is capable of mounting a LCD monitor on either side of the Flycam 6000.
A Wheelbarrow bearing provides Rotational camera controlallowing easy axis rotation. You can easily move whole steadicam up and down the stalk when using the angle bracket for adjustment.
FEATURES OF OUR PROAIM 7000 ARM
Hand adjustable by use of the control knob, once set, guarantees precise behaviour regardless of the weight carried up to 20lbs.
Isolates body movement from the camera and lens
Double section articulated arm constructed of black anodized Hi-grade aluminum with adjustable High Tension spring.
PROAIM – 7000 Reverse Arm has a lifting range of 25” with a tool free ‘one touch’ lift adjustment for each section
Easy set up for High, Normal and Low angle shots
Boom Range of 25”
Arm mount can be made to either front right or front left side of the vest for convenience
Arm Adjustment knob, arm can be adjusted upto 25\" from head to waist
Fine adjustable joint with precision bearings
DV OPERATOR VEST
Lightweight and fully custom fit with 8 adjustable straps
Shoulder, chest and hip pads, made from ultra light ventilating, breathable fabric for cool comfort.
LEFT AND RIGHT SIDE ARM MOUNTING
The arm can be attached to either the right or left side of the vest depending upon the operator\'s preference. It also has the capability for further adjustment within the mount.
Constructed from aluminum for strength and lightweight and covered with an anodized black coating. Stainless Steel screws are used to lock the chest plate.
ADJUSTABLE BODY VEST
To custom fit the vest to different operator body types, there are two adjusting knobs that allow for vertical fine-tuning. Once adjusted properly for a comfort fit, you can set it and forget it.
EXCLUSIVE of Camera and Mattebox
LOW MODE CAMERA CAGE
Our Low Mode Camera Cage is meant for taking extreme/medium low angle shots with the stabilization system. It has a Tilting Adjustment to accommodate creative framing.
EXCLUSIVE of Camera and Mattebox
PROAIM 7\" LCD MONITOR WITH BATTERY & INBUILT BATTERY MOUNT
The LCD provided in the Combo Only has AVI Port. ( The PRO-LCD-003 does not has hdmi port)
Male RCA jacks for a direct connection to your camera without adapters!
16:9 or 4:3 Adjustable Display widescreen
Compatible with most Digital SLR and HD DV Cameras including Sony, Nikon,
Canon, Panasonic, JVC....
High output stereo speakers
Full functional Remote control
NTSC & PAL Compatible
Battery attachment on back of LCD itself
LCD stand for tabletop mounting
360 degree swivel mount
Attaches to camera\'s accessory shoe
On-board AV input
Chargeable Battery of 2300 mAh
Video System : PAL/SECAM/NTSC
Sound System : BG/DK/I/M/N
Screen : Color TFT LCD
Screen Size: 7 inches
Audio Output: 1W (MAX)
Back lightdevice: LED & high brightness cold cathode fuorescent tube.
1, RF IN JACK 2, HEADPHONE JACK 3, AV IN JACK 4, DC 7.2V IN JACK
Power Use: Two kind power for using
1, AC DC Adapter 2, 7.2V Li-ion
Consumption : <7W
This LCD is Non-HDMI and will not work with HD cameras which only have hdmi connection. You can use this LCD with your camera with the help of HDMI TO 3-RCA AV AUDIO VIDEO COMPONENT CONVERT CABLE.(Which is not included in this kit)
When you use this kit, you come to know how useful this kit for your videos...
COLLAPSABLE TRIPOD STAND
Easily portable, for transportation, the legs of the tripod stand when folded can be stored in a little space. Durable, long life construction and traditional rise, it is perfect for the professional / amateur videographer or the consumer who is looking for a high quality tripod. After the pack up, fold the stands up flat for easy transport and convenient storage.
Made of black anodized aluminum, the docking bracket is solid enough to easily hold the weight of your Stabilization system.