FEATURES: Expandable from 4ft (one section) to 22ft (seven section) in 3ft increments Each extendable section is 4ft long giving 1ft overlaps between sections As each section is pulled from the previous section, you can store unused sections in the tail as ballast weight and lighten your counterweight demand The Rear Control Center has provisions for mounting the Joystick Control box, LCD Monitor & Zoom Controller As a quality constructed reinforced jib it should last a lifetime.

The Gold Pan Tilt head featuring 360 degree panning and titling ability of the head. It works on 12v power through the included AC adapter and easily accepts external 12v DC battery power through the included a 1.5mtr long 3pinXLR cable. This Pan Tilt Head is a solid build quality and well designed unit. Gears are made of Brass.

The head frame, gears & joystick controller are very solid. The frame is made of a high grade metal. The XLR cables are built in to the motor and blends well with the rest of the frame. The gears on the head are sturdy and solid quality.

This head comes with Joystick controls the Pan Tilt movements of this head and allows you to create extraordinary videos.

 

• This head has 360 degree end less tilting movement and 360 degree panning movement with reversal point.
• Speed is variable and is easily controlled and adjusted by "Speed" and "Dead Spot" potentiometers on the control unit.
• The Deadspot control determines the center band of the joystick where no motion will occur. This way you can set it to your abilitites and insure no crossover to the other axis when not wanted.
• You can use this head for outdoors shoot occasionally but with some sort of protection cover i.e rain cover or fiber sheet.
• The Head comes in Carrying case with custom fit packing.
• You receive the GOLD PAN TILT HEAD with assembled wiring with Top and Bottom Motor. You just need to Install the Power out to head (3 pin connector) and 12 volt DC power (4 pin XLR) in rear of joystick box.

    

• The PROAIM™ PAN TILT HEAD comes with a remote Joystick control system, 23 feet Long Cable and AC Adapter.
• The joystick may be operated handheld, from a flat surface such as a tabletop, or attached to the boom arm of Jib.
• For exterior shooting power is supplied by the 1.5 meter, 4pinXLR cable attached to a 12volt Brick or Car Battery.

• Joystick has proportional linear movement i.e. farther you move the joystick, the faster the head moves.
• Joystick is touch sensitive:
         Small movement – less speed,
         More movement – more speed.

PROAIM POWER PACK is highly simple, no-nonsense and affordable block battery that has no travel restrictions. Available in two colors Yellow and Black. The default order color is yellow. Black needs to be specified upon order.

One of the unique features of PROAIM POWER PACK is that it holds battery check feature wherein LED charge indicator, indicates the power consumption in three different modes

• Fully charged indicates green
• Low voltage Time to recharge shows red
• Yellow blinking LED shows when a fault is discovered

The Proaim 22ft. octagonal jib in its storage configuration. A sophisticated production tool that re-defines the term value added for your bottom line and most important, your creative imagination. And it's only $2,700 Imagine that!

• Camera Platform
• Rear control Section
• Stress cable
• Proaim Carrying Case for Jib Arm & Stand
• Proaim Custom-fit Suitcase for Accessories

• Joystick Box
• Foam Packing with Bag
• 12 volt AC Adapter
• Universal Adapter
• 32ft long cable with XLR connector for Joystick & Motors
• 1.5 meter long cable with connector for using Battery on Field
• Camera Mounting Chucknut (1/4" screw)
• 4 Head Mounting Screws
• Foam Packing with Bag

• Spreader & feet

• Pelican Case
• 12v chloride battery
• Charger

-Counter-Balance weights
-Camera, Mattebox, Rod Support
-LCD Monitor